Analogue Clock
This element displays the time as an analogue clock within the visualization. No date information is available. The clock’s design can be changed using the Theme Editor.
CONTROL L Unterstützung
Dieses Element kann auch für CONTROL L genutzt werden.
Specific parameters
Address arrays
The analogue clock stops on an EIS3 time frame. This EIBPORT from itself (job "time transmitter") or from the KNX bus system.
Please note that it is not necessary to send the time and date too often. Please use virtual group addresses if the link is only between job and visualisation.
Analogue time - parameters
Use ESF Data
Check this box if you want to see in the visualization of the identifier used by the group address from the ETS as a tooltip.
Offset
Using the offset functionality different time zones can be displayed. The offset unit is “hour”.
Theme Set
The clock’s style can be adjusted by using another graphic style set. Therefore, the free additional tool “Theme Editor” is needed. With this it is possible to replace all the graphics EIBPORT with your own.