Changelog

Version 3.10.1 (07.2026)

Highlights of this version:

• New MQTT data point source in the EIBPORT Logic Editor.

• New test functions for MQTT and Modbus TCP data points.

• Extended Modbus TCP configuration with centralized and individual polling intervals.

• New design options for CONTROL L, including dynamic backgrounds, shadows, and invertible sliders.

• KNXnet/IP Tunneling with Long Frames support.

• Improvements for CONTROL L Status Indicator, Graph V2, Camera element, and Kiosk Mode.

New:

• EIBPORT KNX. Long Frames support for KNXnet/IP Tunneling.

• EIBPORT Logic Editor. New data point source for MQTT.

• EIBPORT Logic Editor. Test function for MQTT data points.

• EIBPORT Logic Editor. Test function for Modbus TCP devices and data points.

• EIBPORT Logic Editor. Modbus TCP. Central polling interval for Modbus TCP data points.

• EIBPORT Logic Editor. Modbus TCP. Optional individual polling interval for individual Modbus TCP data points.

• EIBPORT Editor. New feature "Dynamic Background" for CONTROL L.

• EIBPORT Editor. New feature "Shadow" for visualization elements.

• EIBPORT Editor. New option to configure shadow opacity.

• EIBPORT Editor. New "Invert direction" option for slider visualization elements.

• CONTROL L Status Indicator. New option to prevent automatic reset of messages after a predefined time.

• CONTROL L Status Indicator. Status log revised.

• CONTROL L Graph V2 element. Unified display of decimal places for floating-point values in tooltips and data view.

• CONTROL L Graph V2 element. Improved formatting of Y-axis values to avoid identical axis labels.

• CONTROL L Camera element. Unused camera streams are terminated.

• Logic Editor. User names added to the change history of logic groups.

• Logic Editor. Astro clock element. Configuration dialog revised.

• Logic Editor. Weekly timer element. New option to disable "+ Send other value".

• Logic Editor. KNX data points. Automatically created copies of data points and devices are marked at the end of the name.

• EIBPORT ConfigTool. Apply configuration for virtual group addresses without restart.

• EIBPORT ConfigTool and Editor. Labels in the "Backup" and "Restore" sections extended.

• KNX Server. Improved detection of bus status, especially for runtime changes.

Fixed:

• Visualization Editor. Initial size of visualization elements is reliably reset.

• Visualization Editor. Value display. Values are editable again, even when a tooltip is configured.

• Visualization Editor. Embedded pages can be added again.

• Visualization Editor. Scaling of visualization elements while maintaining the aspect ratio corrected.

• Component Builder. Images are transferred to rules again.

• Job Editor. Astro clock switches reliably when a fixed angle is specified.

• Job Editor. Threshold switch. Result determination in EIBPORT V3.1 corrected.

• Logic Editor. Weekly timer. Processing of weekday and special day modes corrected.

• Logic Editor. Transformer. Moving transformer points outside the value range when adjusting min/max values is prevented.

• Logic Editor. LUA script. Lua properties are no longer overwritten unintentionally.

• Logic Editor. KNX data points. Detection of the change status in the KNX data point management revised.

• Logic Editor. KNX data points. Directory display update optimized when changing data points.

• JAVA CONTROL. Status indicator element. Warning tone is played again for repeated alarm states.

• CONTROL L. Status indicator element. "Bring page to foreground" option is taken into account.

• CONTROL L. Logic display element is shown as expected in Kiosk Mode.

• CONTROL L. Graph V2 element. Sets the correct time range when the year changes.

• CONTROL L. Visualization elements are displayed with rounded corners as in the Editor.

• CONTROL L. Slider reliably stops telegram transmission when released.

• CONTROL L. Graphic element. Switchable color is retained when the visualization is reloaded or the tab is changed.

• ConfigTool. SDMODULE is detected as expected.

• ConfigTool. BAB Securelink. Certificate query is available again.

Version 3.10.0 (03.2026)

Highlights of this version:

• New Modbus TCP data point source in the EIBPORT Logic Editor.

• New CONTROL L visualization element "Energy Flow".

• Introduction of CUBEVISION Editor and CUBEVISION Project Manager.

• New kiosk mode functions for CONTROL L including scaling and alignment.

• Extended long-term database recording with up to 256 group addresses.

New:

• EIBPORT Logic Editor. New data point source for Modbus TCP.

• CONTROL L. New visualization element "Energy Flow".

• CUBEVISION Editor.

• CUBEVISION Project Manager.

• CONTROL L Visualization. Automatic scaling of the CONTROL L visualization in "Kiosk Mode".

• CONTROL L Visualization. "Kiosk Mode" option implemented in the CONTROL L visualization.

• CONTROL L Visualization. Option for "Visualization alignment" implemented in the CONTROL L visualization.

• CONTROL L. New "Shadow" option available for all visualization elements.

• EIBPORT Editor. Long-term database recording. Increased number of group addresses to be recorded to 256.

• EIBPORT Editor / CONTROL L. Graphic element with new option for "Full screen" view.

• EIBPORT Editor. Unneeded configuration options are hidden.

• CONTROL L. Status indicator. Checkbox "Bring page to foreground" is taken into account.

• CONTROL L. LE Plugin. Label text alignment standardized with the CONTROL L visualization.

• EIBPORT Editor. Slider. New data points implemented.

• EIBPORT Editor. Labels in configuration windows dynamically adjust their width.

• EIBPORT Editor. Graphic value display. Optimization of display modes "Pie chart" and "Dynamic pie chart".

• EIBPORT Editor. Border width can be adjusted when "Border type automatic" option is enabled.

• EIBPORT Editor. Graphic element. "Send telegram" action extended with new data point types.

• EIBPORT Editor. Default size of some visualization elements adjusted.

• Logic Editor is opened via HTTPS by default.

• Logic Editor Calendar. Calendar entries can be created across a month.

• VPN SSL Server. The used port is no longer opened when the VPN server is disabled.

Fixed:

• Job Editor Astro clock. Calculates the time points correctly in "Use EIBPORT time zone" mode.

• Job Editor DALI job. Job processes values with 0 correctly.

• Visualization Editor Logic Editor plugin element displayed duplicate entries and lost references.

• LTE. The LTE LED does not switch off after receiving an SMS.

Version 3.9.14 (12.2025)

Fixed:

• CONTROL L. Graphic element is displayed again after reloading the visualization.

Version 3.9.13 (12.2025)

Initial Version for EIBPORT V3.1 KNX EnOcean Variant

Neu:

• EnOcean-Variant.

Version 3.9.12 (11.2025)

Highlights of this version:

• Rotation function for selected visualization elements via group address.

• Increased memory limit for the image pool in the EIBPORT Editor.

• Extensions for the CONTROL R room occupancy plan.

• Stability improvements for KNX/TP and incorrect DNS configurations.

• Fixes for CONTROL L, Component Builder 2, and Logic Editor.

New:

• EIBPORT Visualization. Rotate selected visualization elements via group address.

• EIBPORT Editor. Rotation function for selected visualization elements.

• EIBPORT Editor. Increased memory limit for image pool.

• CONTROL R. Increased weekly switching limit for room occupancy plan.

• Optimized SMS message sending.

• CONTROL L. Adjusted left and right inner spacing of temperature display.

• CONTROL L. Adjusted font size in page link element.

• CONTROL L. Graphic value display considers configured border radius.

• CONTROL L. Graphic value display allows format string without "0".

• EIBPORT Editor. Graphic value display. Minor change in configuration column.

• EIBPORT Editor. Increased memory limit.

• EIBPORT Job Editor. Math jobs are restored from EIBPORT V3 backups.

• EIBPORT ConfigTool. PPTP configuration removed.

Fixed:

• Improved stability for incorrect DNS configurations.

• Loss of connection to KNX/TP when receiving physically addressed KNX telegrams.

• Component Builder 2. Error during image assignment and image upload.

• CONTROL L. Graphic value display. Value is positioned correctly when auto scaling is disabled.

• CONTROL L. Label in page link element is no longer truncated.

• EIBPORT Editor. Graphic value display. Start angle for pie chart corrected in Editor and CONTROL L.

• CONTROL L. Graph V2. Factor is applied for live incoming telegrams.

• CONTROL L. Text size with "Auto. Scaling" now matches the display in the Editor.

• CONTROL L. Graphic element and graphic value display show the correct initial status.

• CONTROL L. Status indicator element can access the status indicator log.

• CONTROL R. Switching behavior of the room occupancy plan corrected.

• EIBPORT Editor. Top consumer display shows percentage values with factor applied.

• EIBPORT Editor. UPnP configuration reads address configuration.

• Logic Editor. Test function for the REST API provides a result again.

Version 3.9.11 (08.2025)

Initial Version for EIBPORT V3.1 KNX LTE Variant

Highlights of this version:

• Initial firmware version for the EIBPORT V3.1 KNX LTE variant.

• Fixes for CONTROL L, Logic Editor, Job Editor, and Web Update.

New:

• LTE variant.

Fixed:

• CONTROL L. Graphic element sends HTTP requests again.

• Logic Editor. Location search in the Logic Editor is available again.

• Job Editor. Math job is saved.

• Job Editor. Time receiver job applies the specified time zone when setting it.

• Web Update is called via BAB STARTER when the HTTP port has been changed.

Version 3.9.10 (07.2025)

Fixed:

• BAB Starter. The Check Settings and Store Credentials functions were not supported.

• Logic Editor. LOGIC EDITOR Network did not display preview images of logic groups.

• CUBEVISION / CONTROL L. The Logic Editor plugin did not load logic groups.

• Hooc Gateway service was not activated.

• Component Builder 2 did not display the grid.

• EIBPORT Editor. No access to the long-term database configuration.

• Logic Editor. The Math element did not validate the syntax of the entered formula.

Version 3.9.11 (08.2025)

Initial Version for EIBPORT V3.1 KNX