Logic

All logical gates connect values of EIS-1. In every job, you can define up to maximal 28 inputs. Conditions for the output of the gate can be determined as follows:

You can set parameters for sending output telegrams at a defined time:
- Only if output status of logic will alter or
- At every new input telegram at the input object of the logic.
- Beyond that, you can adjust, which value output is allowed to send to bus, according to received condition.
All values (so ON- and OFF-telegrams) or
- Only ON (1) or only OFF (0) telegrams
- It can be defined whether a re-calculation is to be performed or not upon enabling. If an ON (1) is sent via the enable object, the output value is re-calculated.

Please note: Take care, that you always only activate as many inputs as you will be require!

Job Name

Required field. Assign a unique name for the job. The name must not contain more than 15 characters.

Gate Group Addresses

By Gate Group Addresses job will be released or blocked. The release object releases or locks the job. It is about an EIS1 object:

Field blank = Job is released.
Field completed, value 1 = Job released.
Field completed, value 0 = job locked.
Field completed, no value = job locked.

As soon as one address is filled in, release will behave respective to the value of the group address. If no value was sent to the address and the address is presently without values, job will be blocked.

Operation Types

Type	Decription
AND conjunction	Gate holds up to 28 inputs, which will be linked logically “and” to one output object.
OR operation	Gate holds up to 28 inputs, which will be linked logically “or” to one output object.
XOR operation (EIS 1)	Gate holds up to 28 inputs, which will be linked logically “exclusive or” to one output object. Connection delivers 0, when all input objects will be 1 or 0 (all be on par). If one output object is different, output will be 1.
Object	Output holds status of the value, which was sent to any input.
NAND, NOR, NXOR	Output of calculation will be sent in negated form.
NObject	Baseline value of type EIS 1: 0 at input value unlike 0. 1 at input value similar 0 In case of several input objects, input is defined on which a telegram was received at last.