EIS 15-Multiplexer

Job „EIS15 multiplexer“ sends predefined text on the basis of EIS 14 input values.

Job Name

Required field. Assign a unique name for the job. The name must not contain more than 15 characters.

Gate Group Addresses

By Gate Group Addresses job will be released or blocked. The release object releases or locks the job. It is about an EIS1 object:

• Field blank = Job is released.

• Field completed, value 1 = Job released.

• Field completed, value 0 = job locked.

• Field completed, no value = job locked.

As soon as one address is filled in, release will behave respective to the value of the group address. If no value was sent to the address and the address is presently without values, job will be blocked.

Input group address

Input object of the service. Format: EIS 14

Activate

Activating, inactivating of corresponding output.

Wildcard

In case check mark is set, command will be sent by every input value.

Trigger

Command will be transmitted, if entered value will be received.

Overwrite

In case check mark will be set, text can be the object can be overwritten by another input.

Text

This text will be sent. EIS 15 can outline 14 characters maximal.

EIS 15 output

On this group address the text will be transmitted.