Static Value / Initial Value

The Static Value logic element allows you to send a predefined value into a logic group when the trigger input is invoked.
A very practical function is "Send on Initialization". The initialization occurs when you activate a logic group or when the device reboots. In this case, the static value is sent as soon as all logic elements of the logic group have been loaded and initialized.
In this way, you can set your logic group to a defined state after startup, independent of any value inputs and their specific initialization behavior.  This is useful, for example, if no value has ever been sent on a group address of a value input.

Contents

Inputs and Outputs

Inputs

• GATE (see Logic Elements | Datapoint-Gate)

• TRIGGER
  Triggers the send action

Outputs

• OUT
  Sends the predefined value

Configuration

Initialization Behavior

As described in the introduction, the static value is sent when the logic group initializes. A logic group will be initialized whenever you activate the working copy or restart the device.

Output Value

The value which is sent when a trigger occurs.

///