If the limit is active, outgoing telegrams from the LOGIKEDITOR will be processed by a queue and sent on the bus with a rate of at most 10 telegrams per second. If telegrams are generated at a faster rate, the queue will fill up accordingly. The queue is limited to 1000 telegrams.
Should the queue reach 1000 entries, e.g. through an infinite loop in a logic group, further outgoing telegrams will be discarded until the queue contains less than 1000 entries. Such cases will produce messages in the Dashboard and the underlying cause should be fixed.
Note
If the Gateway is operated without a connected KNX/TP bus, the telegram rate limitation can be disabled.
In this operating mode, KNX communication is performed via KNXnet/IP Routing.
For applications with a high telegram load, the limitation may only be disabled if the EIBPORT is not connected to the KNX/TP bus.
///