Firmware Update

To update the firmware of the DUODMX GATEWAY, proceed as follows:

1. Use an empty SD card and copy the latest firmware file to the card.

   The firmware file must be named "dmxknx.fir".

2. Disconnect the DUODMX GATEWAY from the power supply.

3. Insert the SD card into the device's SD card slot.

4. Press and hold the "Button" while reconnecting the power supply.

5. Wait until the LED on the DUODMX GATEWAY stops flashing, then release the button.

6. Remove the SD card.

7. Restart the device by disconnecting and reconnecting the power supply.

After a successful restart, the DUODMX GATEWAY will be running the updated firmware.

///