Description of LED-functionality:
Current operating state of EIBPORT are displayed by LEDs at the front side of unit. During boot phase power-LED will shine orange for ca. 30 sec. End of boot phase is signalled by a test of all LEDs. After ending of boot phase, power LED has to shine green.
At this LED will show following conditions:
POWER - LED
|
LED Indication |
Status |
|
OFF |
The device is not ready for operation. There is no power supply |
|
GREEN |
The device is ready for operation. |
|
ORANGE (blinkend) |
The device is booting |
BMX - LED
|
LED Indication |
Status |
|
OFF |
The application server is not running.
|
|
GREEN |
The application server is running.. |
|
GREEN (flashing) |
Indicates current communication via BMX-Protocol. |
KNX - LED
|
LED Indication |
Status |
|
OFF |
The KNX - driver is not running. |
|
RED |
The EIBPORT starts the KNX - driver. |
|
GREEN |
The KNX - driver is running. |
|
ORANGE (flashing) |
KNX - driver processes telegrams. |
LAN - LED
|
LED Indicator |
Status |
|
OFF |
The device is not connected to LAN. |
|
GREEN |
EIBPORT has a connection to the LAN on OSI Layer 2. |
|
ORANGE (flashing) |
The device is exchanging data with the LAN. |
Unlabelled – LED (Position 4; EnOcean)
|
LED Indicator |
Status |
|
OFF |
No EnOcean - Communication |
|
RED (flashing) |
EnOcean - data is received |
|
GREEN |
EnOcean - data is sent |
|
ORANGE |
Data in booth direction are send |
Unlabelled-LED (Position 4; LTE Variant)
|
LED Indicator |
Status |
|
AUS |
Current no SMS - communication |
|
GREEN |
„WWAN Online“ (IP-Address received) |
|
GREEN Flashing (once only) |
SMS is received |
|
RED |
Error event occurred (further information in modem log file) |
|
RED Flashing (once only) |
SMS sent |
|
ORANGE Flashing (once only) |
SMS sent (if is WWAN online ) |