Hue (EIS 10 / 0–65535)
Enter the group address used to set the desired HSB hue value.
Hue Status (EIS 10 / 0–65535)
Enter the group address used to report the current HSB hue value.
Saturation (EIS 14 / 0–255)
Enter the group address used to set the desired HSB saturation value.
Saturation Status (EIS 14 / 0–255)
Enter the group address used to report the current saturation value.
Brightness (EIS 14 / 0–255)
Enter the group address used to set the desired HSB brightness value.
Note
Setting the brightness value to 0 using this group address does not switch off a Hue light.
Brightness Status (EIS 14 / 0–255)
Enter the group address used to report the current HSB brightness value.
The value on this group address is also updated when the brightness is changed using Absolute Brightness or Relative Brightness.
Read HSB Values Only with Send Command
Enable this option if the HSB values should only be read and transmitted after a telegram is received on the HSB Sendgroup address.
HSB Send (EIS 1)
Enter the group address used for the HSB send command.
When a telegram is received on this address, the current values for hue, saturation, and brightness are read and transmitted to the Hue light.
Note
Depending on the Hue device, identical hue and saturation values may result in different displayed colors. Therefore, sending the same values to multiple lights does not necessarily produce identical color reproduction.
///