The available configuration parameters depend on the selected device type.
For Smart Plugs, only the following basic group addresses must be configured:
-
On/Off
-
On/Off Status
-
Name
For Hue lights, additional functions are available depending on the lamp type.
Note
Smart Plugs do not support dimming functions.
On/Off (EIS 1)
Enter the group address used to switch the device on and off.
On/Off Status (EIS 1)
Enter the group address used to report the current switching state.
Name (EIS 15 – 14 Byte Text)
Enter the group address used to transmit the name of the current light or group.
Request Status Values (EIS 1)
When a value of 1 is sent to this group address, all configured status objects transmit their current values, regardless of whether these values are already available on the KNX bus.
During normal operation, status telegrams are only transmitted when a state change occurs within the Hue system.
This function is useful, for example, to initialize visualizations or other devices after a power failure.
///