Features

General

• Status LEDs for indicating the device status

• Buttons for manually disabling the filter functions for group addresses and physical addresses

• Support for extended frames

• Operation as a Secure Proxy (ETS6.1.1 or later) using the ETS application program "Bereichs-Linien-Segment-Koppler 90232x"

• Safe State Mode for stopping the application program (for example, if the device does not operate correctly due to incorrect parameterization or commissioning)

• Function for restoring the factory default settings

Operation as an Area or Line Coupler

• Operation as an Area Coupler or Line Coupler depending on the assigned physical address

• Reduced bus load through telegram filtering

• Support for the full group address range (main groups 0–31) when filtering is enabled

• Configurable forwarding of group telegrams (superordinate line → subordinate line, subordinate line → superordinate line)

• Configurable forwarding of physically addressed telegrams (superordinate line → subordinate line, subordinate line → superordinate line)

• Separate configuration of telegram acknowledgements for group and physically addressed telegrams

• Separate configuration of telegram retransmissions in case of transmission errors for group, broadcast, and physically addressed telegrams

Operation as a Segment Coupler

• Operation as a Segment Coupler (ETS6.1.1 or later) using the ETS application program "Bereichs-Linien-Segment-Koppler 90232x", depending on the physical address or the list of devices assigned to the subordinate segment

• Extension of a KNX line with additional line segments

• Reduced bus load through telegram filtering

• Support for the full group address range (main groups 0–31) when filtering is enabled

• Configurable forwarding of group telegrams (superordinate line segment → subordinate line segment, subordinate line segment → superordinate line segment)

• Configurable forwarding of physically addressed telegrams (superordinate line segment → subordinate line segment, subordinate line segment → superordinate line segment)

• Separate configuration of telegram acknowledgements for group and physically addressed telegrams

• Separate configuration of telegram retransmissions in case of transmission errors for group, broadcast, and physically addressed telegrams

Operation as a Line Repeater

• Operation as a Line Repeater using the ETS application program "Bereichs-Linien-Koppler/Verstärker 90242x"

• Extension of a KNX line with additional line segments

• Forwarding of group and physically addressed telegrams without filtering

• Separate configuration of telegram retransmissions in case of transmission errors for group, broadcast, and physically addressed telegrams

///