Change On/Off (EIS 1)
Enter the group address used to switch the lamp on and off.
-
1 = On
-
0 = Off
Query On/Off (EIS 1)
Enter the group address from which the current switching state of the lamp is reported.
Change Brightness (EIS 6 / 0–100)
Enter the group address used to control the brightness of the lamp.
Values between 0% and 100% are supported.
Query Brightness (EIS 6 / 0–100)
Enter the group address from which the current brightness value of the lamp is reported.
Change Saturation (EIS 6 / 0–100)
Enter the group address used to control the color saturation of the lamp.
Values between 0% and 100% are supported.
Query Saturation (EIS 6 / 0–100)
Enter the group address from which the current saturation value is reported.
Set Color Value
Enter the group address used to set the color value.
The following data types are supported:
-
DPT 5.003: 0° to 360°
-
EIS 10u (2 Byte): 0 to 65535
Query Color Value
Enter the group address from which the current color value is reported.
The following data types are supported:
-
DPT 5.003: 0° to 360°
-
EIS 10u (2 Byte): 0 to 65535
///