Query Current Position (EIS 6 / 0–100)
Enter the group address from which the current blind position is reported.
Values between 0% and 100% are supported.
Target Position (EIS 6 / 0–100)
Enter the group address used to control the target position of the blind.
Values between 0% and 100% are supported.
Obstruction Status (EIS 1)
Enter the group address used to report the obstruction status.
-
1 = Obstruction detected
-
0 = Reset obstruction status
Query Current Tilt Position (EIS 6 / 0–100)
Enter the group address from which the current tilt position is reported.
-
0% corresponds to −90°
-
100% corresponds to +90°
Target Tilt Position (EIS 6 / 0–100)
Enter the group address used to control the target tilt position.
-
0% corresponds to −90°
-
100% corresponds to +90°
Invert Absolute Position
In the Apple Home app, 100% represents the open position.
Many KNX actuators, however, use 100% to represent the closed position.
Enable this option if your KNX actuator uses an inverted position scale.
///