Use this device type to open and close garage doors via Alexa.
For security reasons, opening a garage door must be enabled once in the Alexa app. Alexa will then request a PIN code each time an open command is issued.
Name
Name of the garage door as it should be addressed by Alexa.
Description
Detailed description of the garage door.
Open/Close
Group address to which open and close commands from Alexa are sent.
Default telegram values:
-
0 = Open
-
1 = Close
If Invert Values is enabled, these values are reversed.
Open/Close State
Group address from which the current garage door state is reported to Alexa.
Default telegram values:
-
0 = Opened
-
1 = Closed
If Invert Values is enabled, these values are reversed.
Invert Values
Enable this option to invert the meaning of the telegram values.
In this case:
-
0 = Close / Closed
-
1 = Open / Opened
///