Configured Relays
You can configure up to 10 relays.
To create a new relay, click "Add".
Relay Name
Enter a name for this relay.
DoorBird Relay
A list of all relays available on your DoorBird device is displayed.
Select the relay you want to use.
Activate Relay (EIS 1)
Enter the group address used to activate the selected relay.
When triggered, the door opener connected to the selected relay is activated for approximately 5 seconds.
Relay Feedback Address (EIS 1)
Enter the group address used to report when the relay has been activated.
A telegram is transmitted whenever the selected relay is switched.
Note
In the selection list, configured relays are displayed in the following format:
"Relay Name : Internal DoorBird Name"
The Internal DoorBird Name is the identifier used internally by the DoorBird system.
///