Enable Infrared Mode (EIS 1)
Enter the group address used to activate the infrared LEDs.
Sending a value of 1 switches on the infrared illumination for 3 minutes, improving night vision.
Doorbell (EIS 1)
Enter the group address that receives a value of 1 when the doorbell button is pressed.
Doorbell Delay (Milliseconds)
Specify the time between sending a 1 (doorbell pressed) and a 0 (status reset).
Motion Detector (EIS 1)
Enter the group address that receives a value of 1 when motion is detected.
Motion Detection Enable Object (EIS 1)
Use this group address to enable or disable the forwarding of motion detection events.
Telegram values:
-
1 = Enable motion detection forwarding
-
0 = Disable motion detection forwarding
Motion Detector Delay (Milliseconds)
Specify the time between sending a 1 (motion detected) and a 0 (status reset).
Capture Image on Doorbell
Enable this option to capture an image whenever the doorbell is pressed.
The image is stored locally together with a timestamp.
The stored images are accessible through a web interface and can therefore be integrated directly into a visualization.
The address of the web interface can be found in the detailed Smart Home App view (arrow next to a running instance).
Capture Image on Motion Detection
Enable this option to capture an image whenever motion is detected.
The image is stored locally together with a timestamp.
The stored images are accessible through a web interface and can therefore be integrated directly into a visualization.
The address of the web interface can be found in the detailed Smart Home App view (arrow next to a running instance).
Capture Image via Group Address (EIS 1)
Enter the group address used to trigger image capture.
The captured image is stored locally together with a timestamp.
The stored images are accessible through a web interface and can therefore be integrated directly into a visualization.
The address of the web interface can be found in the detailed Smart Home App view (arrow next to a running instance).
///