The Blinds (Exclusive) device type is used to control blinds with an absolute position or tilt angle.
Communication Objects
Invert Absolute Value
By default, the open position is represented by 100% or the value 255 (1 byte).
The closed position is represented by 0% or the value 0 (1 byte).
If Invert Absolute Value is enabled, these values are reversed:
-
Open = 0% or 0 (1 byte)
-
Closed = 100% or 255 (1 byte)
Note
This inversion only applies to the KNX side. The representation and operation within Google Assistantremain unchanged.
Set Blind Position (EIS 14u – 0...255)
Group address used to move the blind to an absolute position or tilt angle.
By default:
-
100% or 255 (1 byte) = Open
-
0% or 0 (1 byte) = Closed
Blind Position Status (EIS 14u – 0...255)
Reports the current blind position to Google.
Note
With older blind actuators, the same group address may be used for both Set Blind Position and Blind Position Status.
///