This device is a KNX product and complies with the KNX specifications.
Planning, installation, and commissioning require specialist knowledge, which is typically acquired through KNX training.
The functionality of the device depends on the installed software. Information about supported software versions, available features, and the software itself can be found in the manufacturer's product database.
The device supports firmware updates using ETS version 6.4.0 or later.
The device supports KNX Data Secure. KNX Data Secure protects building automation systems against unauthorized access and manipulation and can be configured within an ETS project.
For Secure Commissioning, the Device Certificate attached to the device is required. Remove the certificate during installation and keep it in a safe place.
The following ETS versions are supported for planning, installation, and commissioning:
|
Operating Mode |
Required ETS Version |
|---|---|
|
Area Coupler, Line Coupler, or Line Repeater |
ETS version 5.7.7 or later |
|
Area Coupler, Line Coupler, Segment Coupler, or Secure Proxy |
ETS version 6.1.1 or later |
///