In this section, you configure the transmission of the current time to the KNX bus.
The time can be transmitted automatically at a freely selectable interval or manually via a trigger telegram.
Time (EIS 3)
Enter the group address to which the current time should be transmitted.
The time is transmitted automatically:
-
when the instance starts,
-
after a trigger, or
-
according to the configured transmission interval.
Trigger (EIS 1)
When the value 1 is sent to this group address, the current time is immediately transmitted to the configured group address.
Transmission Interval (Seconds) (1–60)
Specify the interval at which the current time should be transmitted automatically.
Permitted values:
-
1–60 seconds
The default value is 60 seconds.
///